Notes from the workshop.

How parts get made, what makes a file easy to cut, and what the machines taught us this month. Written by the people who run them.

Every note

3 notes

  1. Guides

    Send a drawing we can cut

    The six things a workshop checks in your file before anything is cut, and how to get each one right the first time.

    A plate of geometric construction drawings: squares, circles and stars set out with letters and dashed lines
  2. Workshop

    From your file to a finished part

    What happens between the order and the parcel: checking, nesting, cutting, finishing and the last look before packing.

    A vacuum lifter lowering a sheet of plywood from a stack, with a CNC nesting router behind it
  3. Design

    Five tips for parts that cut cleanly

    Hole sizes, distances from the edge, inside corners, the width of the cut, and fits that slide together.

    A laser cutting head over a sheet of dark wood veneer, a bright point where it cuts
The cutting head of a laser cutter over its honeycomb bed, lit from the side in a dark room
The laser head at rest, over the bed it cuts on.
A clock in a clear laser-cut acrylic case, its glowing orange digits showing the time
A laser-cut acrylic case, made to a customer's drawing.

Who writes here

We cut sheet metal, wood and plastic to our customers' drawings. These notes are what we would tell you across the counter: what goes wrong, what goes right, and why.

Have a drawing ready?

Send it with the material and how many you need. We reply with a price.

Get in touch

Pictures from Wikimedia Commons: Laser CNC Cutting Head, Adaeuper, CC BY-SA 4.0; Blueprint reading, plate II, Internet Archive Book Images, no known restrictions; CNC nesting router, ChazGoodman, CC BY-SA 4.0; CNC laser cutting head in use, Henrysz, CC BY 4.0; Nixie clock case, Adam Greig, CC BY-SA 2.0.